11-12m-battery-cooling-system
11-12m-battery-cooling-system

10KW Battery Battery Cooling System

> Cooling: 10KW
> Voltage: DC400-750V
> Customized: Dimension/Cooling/Heating
TKT Battery Cooling System Introduction
Battery cooling sytems for commercial vehicles:
Many countries are focusing on their electric vehicle solutions, especially buses, trucks and construction vehicles. Factors such as increased pollution and environmental hazards, government regulations and fierce competition are forcing OEMs to make a change to purely electric vehicles. This is the best way to protect the climate and save costs, while also advancing the modernization of cities.

For urban commercial vehicles, they are measured by the hours they work. For maximum autonomy, most of the stored electricity should be used for the primary use of the vehicle (driving, transporting or working) and not for secondary uses (heating, cooling, fan drive). If batteries could also meet these needs, either the size, weight and cost would increase significantly or the autonomy would decrease accordingly.


TKT BTMS Solution:
TKT BTMS is now available for Electric Bus, Off-Highway, and Commercial vehicles. 8 options for you to choose from. we also design and develop for vehicle. We also design and develop for vehicle manufacturers. The advantages of high quality and demanding products, as well as the price of mass-produced products, make us your partner are obvious. We will provide design and technical support to the world's leading vehicle manufacturers, please feel free to contact us.




  
TKT BTMS & OEM Case:
Based on the market demand for electric commercial vehicles, TKT began researching and designing a Battery Thermal Management System (BTMS) in 2012. In a battery cooling system, the temperature of the battery pack is kept within the right range to maintain a longer mileage and service life. In general, an effective battery cooling system is necessary to ensure the life and performance of the batteries. To address these challenges, TKT has developed a range of products to address these issues, enabling each component to operate under optimized thermal conditions, extending service life and increasing efficiency. Combining the price advantages of mass production with global leadership in providing state-of-the-art vehicle components.





Structure:
Condenser coil, condenser fan, water tank, water pump, heat exchanger, electric compressor, control panel, CAN module, expansion valve, etc.

The condenser system cools down the coolant and the water pump will run the coolant through the BCS and the battery structure system to release the heat generated by the battery pack.


Our Advantages:
1. Patented design for high cooling/heating effect with low weight.
2. CAN control to avoid damage to the battery pack by incorrect operation
3. Precise temperature control (0.5 degrees Celsius)
4. Use of IP67 electrical components, such as electric compressor, water pump, connectors, etc.
5. Quality and performance are recognized worldwide.
6. Reliable support and service.

We offer you more than just our products. We are there for you every step of the way. Our technicians advise you from the very beginning and integrate our solutions perfectly into your existing systems. We also welcome all good OEMs to discuss technology and developments with us.



Why choose TKT?
We offer you not only highly specialized production, in-house testing, prototyping and simulation, but also a professional partner. In addition, our battery cooling systems have been tested and certified, all to the highest safety and quality standards. Many OEMs benefit from our future-proof battery solutions, including more than 20 outstanding companies such as TaTa India. Join us today in moving towards a greener and more sustainable future.
OEM/ODM Process
During the passed 24 years, TKT grows to the 100% OEM choice in China, for both bus A/C and truck refrigeration units, such as Yutong, Nanjing Golden Dragon, Xiamen Golden Dragon ect (Bus A/C), CIMC, Xinfei, Hongyu ect (Truck Refrigeration units). For the international market, TKT is the OEM for TATA Motors, TATA Marcopolo Motors, Daewoo ect, and exported to more than 85 countries with sales and service center.


If you are interested in working with TKT, please feel free to contact us.
 
 
INQUIRY
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
Contact Person:
*Email:
*Phone Number:
*Preferred Product:
*Message:
Copyright@TKT HVAC Co., Ltd. All Rights Reserved.
Technical Support : Coverweb
INQUIRY
Contact Person:
Email *
Phone No.:*
Preferred Product:*
Message*
+